Glass Cutter Lip Rules

Glass cutter lip rules are used extensively by glass cutters and glaziers, steel mills, foundries and metal workers.

(Lip Rule - detail of lip end)

Glass Cutter Lip Rule Product Details:

• One-piece, hand-selected hard maple, properly seasoned, smooth and well finished with a clear protective coating
• One end with an extruded brass lip or flange, extending 3/8" from one flat surface of the rule, attached by four rivets extending through both side plates. Opposite end has an inlaid brass cap attached in the same fashion.
• On upper face, zero falls at the inside of the lip; on lower face, zero falls at the opposite end of the rule
• Bold markings engraved into the wood
• Graduations marked on both sides, and on
  both edges
• Graduations in 1/8th inch increments

Our professional wooden rules are also sold in bulk quantities; contact us for details.

To place an order, please call 207-474-0953.

(Lip Rule - end cap)

===========================

PROFESSIONAL PRODUCTS:

• Yardsticks and Metersticks
• Flat Wooden Bench Rules
• Glass Cutter "L" Squares
• Glass Cutter Lip Rules